Pyronix PCX 256 Manual de instalación descargar pdf (Pagina 26)

PCX 256 PROGRAMMING MANUAL

RINS868-6 Page: 25

5.7.5 Access Control

The following programming shows how to set up the Access Control facility if you are using it. Also

the same programming process applies to ‘Entry Control’ which allows a tag reader to control an

entry point.

Visual Keypad Programming Procedure

ASSIGN KEYPADS/READERS

Access Control

Assign Keypads/Readers

Using the and keys, scroll to ‘ASSIGN

KEYPADS/READERS?’

Press the key

Address

Enter the address of the keypad/reader you wish

to assign. Press the key

Type

Enter : for Reader

Press the key

Reader Is

Enter : for Access Control

Press the key

Enter the Lock Open Time (max: 250 seconds).

This is the time the door release is going to be

active when a valid tag’s presented.

Press the key.

Enter the Door Open Time (max: 250 seconds).

This is the time the door is allowed to be open

before triggering an alarm.

Press the key.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Sin comentarios

Pyronix PCX 256 Manual de instalación Pagina 26